https://manuals.cyborg-engravers.com/ 2026-07-04T23:02:15+00:00 https://manuals.cyborg-engravers.com/ https://manuals.cyborg-engravers.com/lib/tpl/dokuwiki/images/favicon.ico text/html 2025-04-29T11:53:26+00:00 Anonymous (anonymous@undisclosed.example.com) https://manuals.cyborg-engravers.com/doku.php?id=en:faq-troubleshooting:connection_pc-machine&rev=1745920406&do=diff The connection between the machine and the pc is lost ---------- * Check if the pc and the machine are correctly connected with a CAT 6A ethernet cable in good working condition. * Check if the pc is still configured with the correct fixed IP-address (172.22.2.101). text/html 2025-04-29T11:15:02+00:00 Anonymous (anonymous@undisclosed.example.com) https://manuals.cyborg-engravers.com/doku.php?id=en:faq-troubleshooting:pendent_settings_one_tab_only&rev=1745918102&do=diff The Cyborg pendent only shows one tab in the preferences. How do I bring up the other two? ---------- * In the Cyborg Pendent window right click on the “?” in the upper right corner of the window. * Hold the “Ctrl” and the “Shift” keys of your computer keyboard simultaneously and left click on the option text/html 2025-04-29T11:37:39+00:00 Anonymous (anonymous@undisclosed.example.com) https://manuals.cyborg-engravers.com/doku.php?id=en:faq-troubleshooting:start&rev=1745919459&do=diff Frequently Asked Questions / Troubleshooter ---------- * The connection between the machine and the computer is lost. * I can’t enter my Symmetry registration code, why is that? * During the installation of the engraving software you must use Administrator rights. Only then can the installation of the engraving software be performed correctly.