es:x300:parking
Parking keys
 +  | Park the spindle in the rear Press the + keys to park the spindle to the rear of the engraving table. |
+  | Park the spindle to the right Press the + keys to park the spindle to the right of the engraving table. |
+  | Park the spindle to the left Press the + key to park the spindle to the left of the engraving table. |
+  | Park the spindle in the front Press the + key to park the spindle to the front of the engraving table.. |
Return to the keypad overview.
Continue to the table of contents.
es/x300/parking.txt · Last modified: 2022/09/27 22:07 (external edit)
