es:x300:jog_y_keys
Jogging the spindle
 | Jog to the left (X-) and to the back (Y+) Press the key to jog the spindle to the rear.The jog speed is determined jog speed bar setting. |
 | Jog to the right (X+) and to the back (Y+) Press the key to jog the spindle to the left.The jog speed is influenced by the jog speed bar setting. |
 | Jog to the left (X-) and to the front (Y-) Press the key to jog the spindle to the right.The jog speed is determined by the jog speed bar setting. |
 | Jog to the right (X+) and to the front (Y-) Press the key to jog the spindle to the front.The jog speed is influenced by the jog speed bar setting. |
Use the jog speed bar to change the speed 
. Click on the rabbit or on the turtle, or click on the dial.
Return to the keypad overview.
Continue to the table of contents.
es/x300/jog_y_keys.txt · Last modified: 2022/09/27 21:47 (external edit)
