en:x300:koppeling
This is an old revision of the document!
Park spindle in the rear
+ 
The PARK Y + function will move the spindle assembly to the very rear of the engraving table.
Activating Park Z.
Press the SHIFT key and then the Z-AXIS JOG UP ARROW 
to raise the spindle assembly to the absolute Z 0 position.
Keypad status bar displays:
“Parking …”
Return to the keypad overview.
Continue to the table of contents.
en/x300/koppeling.1664137834.txt.gz · Last modified: 2022/09/25 22:30 by erik.ketele
