cyborg-engravers

Periodic maintenance is of utmost importance to keep your machine in optimal working condition and to give it a long lifecycle.
When performing periodic maintenance, try to follow the prescriptions which follow hereunder.
It may be a good idea to write down your maintenance activities in a table.

• Verify the linear bearing slides and clean them with a soft cloth, eventually using some light oil. After cleaning make sure to remove the excessive oil with a dry cloth.
• Unscrew the depth regulator ring and nose and inspect the inside. Clean the inside and put some grease on the threaded lower part of the spindle before screwing the nose ring on again.

Continue to annual maintenance.
Continue to the table of contents.