en:x200:jog_keys
Jogging the spindle
 | Jog to the back (Y+) Press the key to jog the spindle to the rear, which is moving the table to the front.The jog speed is determined jog speed bar setting. |
 | Jog to the left (X-) Press the key to jog the spindle to the left.The jog speed is influenced by the jog speed bar setting. |
 | Jog to the left (X+) Press the key to jog the spindle to the right.The jog speed is determined by the jog speed bar setting. |
 | Jog to the front (Y-) Press the key to jog the spindle to the front, which is moving the table to the back.The jog speed is influenced by the jog speed bar setting. |
Use the jog speed bar to change the speed 
. Click on the rabbit or on the turtle, or click on the dial.
Return to the keypad overview.
Continue to the table of contents.
en/x200/jog_keys.txt · Last modified: 2025/04/22 11:21 by erik.ketele
