====== Move spindle down 1 mm=======

{{:en:x300:key_shift.png?50|}} {{:en:x300:key_zdn.png?50|}}\\
\\

Press the SHIFT {{:en:x300:key_shift.png?20|}} key and then the Z-AXIS JOG DOWN ARROW {{:en:x300:key_zdn.png?20|}} to lower the spindle exactly 1 mm.\\
This key combination can be used several times one after the other.  Each time the spindle will lower 1 mm.

\\
**Return to [[keypad_overview|the keypad overview]].**\\
**Continue to [[:en:x200:table_of_contents|the table of contents]].**