cyborg-engravers

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== unidirectional or bidirectional engraving =====

\\
A very unique feature of the Cyborg X-200 is the ability for the user to choose between unidirectional and bidirectional engraving.\\
This feature dramatically improves the engraving results in aluminium, steel and other more difficult to engrave materials.\\
\\
{{:en:x300:bidirectional-red-green.png?80}} If this icon is shown on the virtual pendent, every character or vector will be engraved in the preprogrammed direction, which is fine for most plastics.\\
{{:en:x300:bidirectional-green-green.png?80}} If this icon is shown on the virtual pendent, every character or vector will be engraved in the preprogrammed direction. At the end of each character the spindle will stay down in the material and run through the character again in the opposite direction.\\
\\
Clicking on the icon will alternate between the 2 possible choices.

**Return to [[:en:x200:keypad_overview|the keypad overview]].** \\
**Continue to [[:en:x200:table_of_contents|the table of contents]].**

cyborg-engravers

User Tools

Site Tools

Page Tools