cyborg-engravers

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Diagonal jogging keys ======



| {{:en:x300:key_upleft.png?50|}} | **Jog to the left (X-) and to the back (Y+)**\\ Press the {{:en:x300:key_upleft.png?20|}} key to jog the spindle to the left and to the rear simultaneously.\\ The jog speed is determined jog speed bar setting.  |
| {{:en:x300:key_upright.png?50|}} | **Jog to the right (X+) and to the back (Y+)**\\ Press the {{:en:x300:key_upright.png?20|}} key to jog the spindle to the right and to the rear simultaneously.\\ The jog speed is influenced by the jog speed bar setting.  |
| {{:en:x300:key_downleft.png?50|}} | **Jog to the left (X-) and to the front (Y-)**\\ Press the {{:en:x300:key_downleft.png?20|}} key to jog the spindle to the left and to the front simultaneously.\\ The jog speed is determined by the jog speed bar setting.  |
| {{:en:x300:key_downright.png?50|}} | **Jog to the right (X+) and to the front (Y-)**\\ Press the {{:en:x300:key_downright.png?20|}} key to jog the spindle to the right and to the front simultaneously.\\ The jog speed is influenced by the   hot key setting.  |
\\
**Return to [[keypad_overview|the keypad overview]].**\\
**Continue to [[:en:x200:table_of_contents|the table of contents]].**

cyborg-engravers

User Tools

Site Tools

Page Tools