Differences

This shows you the differences between two versions of the page.

--- en:x300:find_machine_origin [2022/09/24 23:15]
erik.ketele
+++ en:x300:find_machine_origin [2023/05/17 10:05] (current)
@@ Line 2: / Line 2: @@
-The “Find Home” function returns each axis to the machine home position to relocate the homing targets. The Spindle Head Assembly will move to the left rear of the table and index all X/Y/Z components starting with the Z-axis first, then the Y and the X axis.
+{{:en:x300:key_shift.png?50|}} {{:en:x300:key_gohome.png?50|}} The “Find Machine Origin” function returns each axis to the machine home position to relocate the homing targets. The Spindle Head Assembly will move to the left rear of the table and index all X/Y/Z components starting with the Z-axis first, then the Y and the X axis.
+\\
-Finding Machine Home.
+\\
-Press the SHIFT  and then the GO HOME   hot keys to index the gantry, carriage, and Z assembly off of the limit switches when:
+**Finding Machine Home.**\\
- a) The machine has just been turned on.
+\\
- b) The machine has stalled (lost position).
+Press the SHIFT {{:en:x300:key_shift.png?20|}} and then the GO HOME {{:en:x300:key_gohome.png?20|}} hot keys to index the gantry, carriage, and Z assembly off of the limit switches when:\\
-Keypad status line display:
+ a) The machine has just been turned on.\\
- "Homing Z ...", then “Homing Y…”, and then “Homing X…”
+ b) The machine has stalled (lost position).\\
- The display will show each axis coordinate to be 0.0 when the targets are located.
+\\
+Keypad status line display:\\
+ "Homing Z ...", then “Homing Y…”, and then “Homing X…”\\
+ The display will show each axis coordinate to be 0.0 when the targets are located.\\
 \\

cyborg-engravers

User Tools

Site Tools

Differences

Page Tools