en:x200:quick_lock_vise_example
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision
Previous revision
|
|
en:x200:quick_lock_vise_example [2025/10/03 14:33]
erik.ketele |
en:x200:quick_lock_vise_example [2025/10/03 14:36] (current)
erik.ketele |
| |{{:en:x200:standard_keys.png?250|Activate home 2.jpg}}|Click on the "Home" icon. \\ In the little window which appears click on number 2. \\ The Home button now shows {{:en:x300:two.png?40}}. \\ At the same time the spindle will be positioned on this preprogrammed spot.| | |{{:en:x200:standard_keys.png?250|Activate home 2.jpg}}|Click on the "Home" icon. \\ In the little window which appears click on number 2. \\ The Home button now shows {{:en:x300:two.png?40}}. \\ At the same time the spindle will be positioned on this preprogrammed spot.| |
| |{{en:x200:set_surface_enter.png?200|set surface.jpg}}|Jog the spindle and position it over the plate (not on the border of the plate). \\ Lower the spindle using the "Z down" {{en:x300:key_zdn.png?40}} button till the spindle nosecone just touches the material. \\ There hit the "set surface" {{en:x300:key_surface.png?40}} button and click the "Enter" button in the little window which opens (the image on the left shows this little window). \\ The spindle will move up and the machine knows where the plate surface is.| | |{{en:x200:set_surface_enter.png?200|set surface.jpg}}|Jog the spindle and position it over the plate (not on the border of the plate). \\ Lower the spindle using the "Z down" {{en:x300:key_zdn.png?40}} button till the spindle nosecone just touches the material. \\ There hit the "set surface" {{en:x300:key_surface.png?40}} button and click the "Enter" button in the little window which opens (the image on the left shows this little window). \\ The spindle will move up and the machine knows where the plate surface is.| |
| |{{:en:x200:f9_x200-jig.png?400|jig-B.jpg}}|In Symmetry, after having entered the layout and text for the plate, go to "File - engrave output" and you will see the window here on the left. \\ Pay attention to this part: {{en:x200:F9-detail.png?250}}. \\ The **Park at end of job location** lets you specify where the spindle has to park after finishing the job. \\ If you would select the default option (Home (0.0, 0.0)) then the spindle would be parked over Home2, which is not convenient to open the vise and remove the plate. \\ Better is to have the spindle move away from the vise at the end of the job.| | |{{:en:x200:f9_x200-jig.png?400|jig-B.jpg}}|In Symmetry, after having entered the layout and text for the plate, go to "File - engrave output" and you will see the window here on the left. \\ Pay attention to this part: {{en:x200:F9-detail.png?250}}. \\ The **Park at end of job location** lets you specify where the spindle has to park after finishing the job. \\ If you would select the default option (Home (0.0, 0.0)) then the spindle would be parked over Home2, which is not convenient to open the vise and remove the plate. \\ Better is to have the spindle move away from the vise at the end of the job. \\ \\ **output job from this plate offset**. Make sure the upper middle circle is marked, because that is the reference point of the upper jig on your quick lock vise.| |
| |
| |
en/x200/quick_lock_vise_example.txt ยท Last modified: 2025/10/03 14:36 by erik.ketele
