Differences

This shows you the differences between two versions of the page.

--- en:symmetry:installation [2023/05/17 10:05]
127.0.0.1 external edit
+++ en:symmetry:installation [2025/04/17 16:19] (current)
erik.ketele
@@ Line 1: / Line 1: @@
-====== Software Installation ======
-----
 ====== Software Installation ======
@@ Line 11: / Line 7: @@
 You will need the following hardware and software to develop and output jobs in Symmetry.
-  * Microsoft Windows 10 or 11
+  * Microsoft Windows 11 professional.
   * 1 PC, keyboard, mouse and a monitor. If Symmetry has to run simultaneously with the Cyborg virtual pendent, and you want your PC to be part of a LAN, then you will need 2 ethernet ports in the PC.
   * A free USB port to install the Symmetry software.
@@ Line 37: / Line 33: @@
   * After having entered the release code click the 'Apply' button. Symmetry will inform you that the software is now registered, and that you will have to close the program and restart it in order to work with the registered licence.
-**Continue to [[:en:x300:third_party_software|using third party software]].**\\
+**Continue to [[:en:x200:third_party_software|using third party software]].**\\
-**Continue to [[:en:x300:table_of_contents|the table of contents]].**
+**Continue to [[:en:x200:table_of_contents|the table of contents]].**

cyborg-engravers